User Manual

50 - 8644/Rockwell
SYSTEM DESCRIPTION
Basic electronic module ME03 / 2-fold bistable
Construction
A basic electronic module consists of a distributor module (back-wall bus) and a function module. Both
modules are contacted via a 14-pole board-to-board connector.
Technical data ME03 / 2-fold bistable
Dimensions WxHxD 33x93x60 mm
Weight 49.1 g
Storage temperature -20 to +60° C
Rated voltage under load DC 24 V
No. of valve outputs 2 x 2
Current consumption per valve position 41 mA
Current consumption from the back-wall bus max. 75 mA
Display of valve status 2 yellow LED per valve position
Display of module status
1 red / green LED per modul
(1st valve position)
Display of networkl status
1 red / green LED per modul
(2nd valve position)
Power dissipation of module 1.8 W
Basic module type
Add-on
dimension
Valve
position
Valve type Function
ME03 2-fold bistabile 16.5 mm 2 0461
5/3-way
5/2-way pulse
123
Possible combinations with valve types
Connection configuration of valve connector
1 Valve coil A
2 24 V
3 Valve coil B
Function display of LEDs
red / green LED
yellow LED
yellow LED
switched position
The functional module, like the electronics modules of the Point I/O system, may be pulled off and
plugged on during operation. 24 V is applied to the valve.
Network status (only 2nd valve position)
Module status (only 1st valve position)