CC 9058 Index Introductory information 1. General 2. Security guidelines Installation of the hands-free car kit 3. Scope of supply 4. Positioning and mounting 5. Connections at electronic box Operating guidelines 6. Using the hands-free car kit for the first time 7. Operating with the touch screen 8. Establishing a Bluetooth connection 9. Menu navigation 10. Accepting, making, ending calls 11. Playing music Further Information 12. Service 13. Appropriate use of this system 14.
Introductory information 2 1. General Dear customer, Congratulations on purchasing a BURY hands-free car kit. You have chosen a high quality product that is extremely easy to use. Please read the operating manual carefully so that you can fully enjoy your BURY hands-free car kit. If you have any further questions concerning installation or operation of your car kit, please contact your dealer. He will be happy to give you reliable advice. You can also contact our hotline.
Intended use We shall not be liable for damages or malfunctions due to improper use of the hands-free system. Therefore, do not expose the device to moisture, extreme temperatures or shocks and carefully follow the procedure described in the installation and operating guidelines. Use while driving Operate the system only when the situation allows it and when you do not endanger, harm, constrain, or annoy other road users.
Installation of the hands-free car kit 3.
The hands-free car kit (HFCK) is supplied with different combinations of components, depending on the sales regions (countries). The operating manual refers to all versions.
Installation of the hands-free car kit 4. Positioning and mounting Step 1: First of all, please choose the most convenient position for the attached display on the holder and the installation pad in your vehicle by checking different positions in the vehicle. If you would like to use the device during your journey, positioning it in the front area on the driver’s side is advisable. Sit in the vehicle and check whether you can reach the device without difficulty.
Example of installation 1: 1 2 3 5 4 6 Example of installation 2: 1 4 2 5 3 6
Installation of the hands-free car kit Step 2: Depending on the vehicle type and its equipment (e.g. airbags), it is reasonable to install the microphone either at the A-pillar, at the sun shield or at the roof interior. For details about the equipment features please refer to the vehicle documents. Step 3: Remove or loosen up cladding and covers to be able to install all of the cables in the vehicle as comfortably as possible.
5. Connections at electronic box The other components of the hands-free car kit are connected to the electronic box.
Installation of the hands-free car kit Using the ISO cable harness, you can input music and voice signals (telephone) of different types into the radio or play them back via the radio. If the present radio has a LINE-IN or AUX-IN input at the front side or backside, the four open LINE cables of the ISO cable harness can be connected to them using appropriate adapters (e.g. 3.5 mm stereo jacks or cinch connectors). The radio amplifier is used for music playback in that case.
If you want music or voice signals to be fed via the four LINE cables, you must adjust them accordingly to the respective type of radio and its connections (PHONE-IN or AUX-IN). Appropriate adapters are available from specialists shops. Step 2: The hands-free car kit supports the radio mute function, if this function is also supported by the radio. The mute signal is then fed to the radio via the yellow cable of the ISO cable harness.
Installation of the hands-free car kit 12 Connection diagram for ISO cable harness - 12V Power 12/24V Ignition Ground Line-out 1 1-Line L + / Phone L + 2-Line L - / Phone L - - Line-out 2 1-Line R + / Phone R + 2-Line R - / Phone R - - Micro Molex 24 - ISO - connection to the electronic box (HFCK) - connection to the vehicle’s speakers - connection to the vehicle’s power supply - connection to the car radio - connection to the car radio 1 - C RR2 - C RF3 - C LF4 - C LR5 - R LR6 - R LF7 - R RF8 - R
3 - MICROPHONE This is where you plug in the microphone jack. 4 - LINE-IN To connect external music players. 5 - MULTIFUNCTION DISPLAY Please plug the 5 pole plug of the monitor connection cable into this jack.
Operating guidelines 6. Using the hands-free car kit for the first time After the power supply of the hands free car kit (HFCK) is successfully connected, the HFCK is activated when you have started the vehicle. After this, you have to select the menu language. You can change the menu language by going to Settings in the Menu and selecting the desired language using the horizontal buttons in the language menu. When you select the desired Language with the call button, the language is loaded.
7. Operating with the touch screen Navigation is done using different buttons. With the end button you can cancel actions or go back one step. When you press and hold the home button you will go directly back to the main menu. Actions are confirmed or executed with the call button. Use the horizontal buttons to navigate within the menus. Main menu with connected phone If you operate the system with the touch screen then it gets dirty over time.
Operating guidelines If it is not possible to establish a connection, please check and update the software release (firmware) of your mobile phone or of the HFCK. You will find an overview dealing with this subject on the Internet at www.bury.com. Note: XXIn the internet you can find an overview with a large number of mobile telephones which have been tested with this hands-free car kit.
9. Menu navigation Operating the CC 9058 is done using the touch keys on the device. The function of the keys can differ for each menu item. To open the menu, press the home button. To navigate within the menus use the horizontal buttons. The selected menu item will then be highlighted in blue. To select this menu item press the call button. To close this menu press the end button. Note: XXPlease take note of the country-specific legislation regarding making phone calls whilst driving.
Operating guidelines 18 Dialling a number If you select the function Dial number in the system menu, you can dial the number on the CC 9058 display using the numeric keypad. You dial the number by moving the digits on the vertical dots bar left and right to select and confirm the selection with the green receiver. If you have entered the correct number, press and hold the green button for approx. 3 sec., and the number will be dialled. Synchronisation You can Load the phone book in this menu.
Thanks to the Multipoint function, you can connect two mobile telephones simultaneously to CC 9058 via Bluetooth. You can operate this function with the home button. First, activate the system Multipoint Function (Menu->Settings->Bluetooth->Multipoint->ON). Then connect the first mobile phone with the system and disconnect it again. The next step is connecting and disconnecting the second phone.
Operating guidelines Note: XXFor some mobile combinations, in multipoint mode, it can be the case that the voice output during an active phone call is no longer emitted via the CC 9058 if you accept an incoming call on the second phone using the phone itself. XXCompletely functional call management can only be guaranteed by using the CC 9058 control panels. Automatic connection At least one telephone is listed in the CC 9058 telephone list.
Equalizer When playing music we have access to the equalizer - a pack of filters that are used to boost or suppress a particular frequency range of sound and to control volume adjustment. In order to avoid glare when driving at night, Sleep mode can be activated. In sleep mode, the display will turn off after either 15, 30, 60 or 90 seconds. Press the home button to return to active mode. When a call is incoming, the HFCK activates the display automatically.
Operating guidelines 10. Accepting, making, ending calls The CC 9058 is operated using the key buttons on the device. The function of the buttons can vary according to the menu item. Note: XXPlease comply with the country-specific laws concerning in-car telephone calls. Making calls Press the call button. The device says: Enter voicetag. Give your voicetag loud and clearly.
Option 2: Reading out the phonetics For some mobile phones, you can open up the mobile phone directory by pressing down the CC 9058 call button. The device says: Enter voicetag. The voicetag you enter (contact name) is compared with the contacts saved in the mobile phone directory using phonetic technology and selected if there is a match. Option 3: Using your smartphone‘s voice dialling function Most smartphones have a voice dialling function which you can activate using CC 9058.
Operating guidelines Outgoing call Briefly press down on the call button to activate the voicetag function. The device says: Enter voicetag. Begin the call with a voicetag. If the number dialled is busy, you can begin to redial. To do so, hold down the call button (for two seconds). The device says: Redial. If you announce a non-saved voicetag then the device says: Voicetag is not available. CC 9058 returns to standby mode.
11. Playing music There are two ways of playing music in case of the CC 9058 hands-free car kit. Through A2DP (Bluetooth) After the phone is paired with the hands-free car kit, music can be played via the Bluetooth connection (A2DP). Music player in the phone has to be turned on. Handling music playback is done with the phone/music player (play, stop, pause, forward, backward). Volume adjustment can be controlled with the hands-free car kit.
Further Information 12. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: Administration: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 D-32584 Löhne GERMANY Producer: BURY Spółka z o.o. ul. Wojska Polskiego 4 39-300 Mielec POLAND Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min.
13. Appropriate use of this system This hands-free car kit is only intended for use with Bluetooth mobile telephones in motor vehicles. When using this system, please comply with the regulations and laws specific to the country in which you are driving and the instructions provided in the guidebook for the mobile telephone that you are using. 14.
EXPRESS WARRANTY AGAINST DEFECTS – AUSTRALIA EFFECTIVE 1st JANUARY, 2012 This product if imported by Point to Point Technology Pty Ltd is warranted in Australia to be free from any defect in material and workmanship, subject to the following terms and conditions. Who provides this warranty: Geographical Region: Warranty Period: POINT TO POINT TECHNOLOGY PTY LTD 2/2 KEYSBOROUGH CLOSE, KEYSBOROUGH VIC 3173 TOLL FREE: 1300 550 720 EMAIL: service@ptp.net.