USER Manual Owner's manual

Operating guidelines

If it is not possible to establish a connection, please check and update the software release (firmware)

of your mobile phone or of the HFCK. You will find an overview dealing with this subject on the Internet

at www.bury.com.

Note:

In the internet you can find an overview with a large number of mobile telephones X

which have been tested with this hands-free car kit. Please note, however, the use of

firmware which deviates from the list and is installed on a listed mobile telephone can

lead to the fact that certain displays and functions are no longer possible or only possible

to a limited extent.

In addition it is possible that you must delete all devices connected to your mobile phone first in

order to enable a correct identification of the HFCK and the establishment of a connection. If you

have queries regarding the menu navigation, functions and operation of your mobile phone,

please refer to the operating guidelines of your mobile phone. Depending on the manufacturer

and type, this can differ considerably between phones.

Note:

If the rechargeable battery of the mobile phone is low, it is sometimes not possible to X

establish a

Bluetooth

connection.

The HFCK has a memory for the storage of the identification of up to 8 mobile phones. In case

a ninth mobile phone is connected, the oldest entry in the HFCK memory will be cancelled.

If you wish to cancel a

Bluetooth

connection, you can either disconnect it conveniently at the

HFCK or at your mobile phone. In addition, the connection is disconnected, if you move too far

away from the vehicle while taking your mobile phone with you and thus leave the reception ra-

dius of the HFCK.

Please note that the capacity of your mobile phone‘s storage battery can quickly decrease when

the

Bluetooth

function is active. If you do not want to use the

Bluetooth

function anymore, e.g.

if you leave the vehicle for a longer period, it is recommended to deactivate this function.