USER Manual Owner's manual

Operating guidelines

Dialling a number

If you select the function Dial number in the system menu, you can

dial the number on the CC 9058 display using the numeric keypad. You

dial the number by moving the digits on the vertical dots bar left and

right to select and confirm the selection with the green receiver. If you

have entered the correct number, press and hold the green button for

approx. 3 sec., and the number will be dialled.

Synchronisation

You can Load the phone book in this menu. With Upload phone book

you can save your phone book on the CC 9058. To delete the phone

book again, simply go to Delete phone book.

Note:

Lots of mobile phones save contact details consecutive- X

ly. If you now delete one or more contacts then there will

be memory gaps if you do not reorganise the contacts. If,

whilst synchronising the contacts, the CC 9058 finds gaps

which are too big then the process will be terminated. It

is therefore possible that the phone book will not be com-

pletely synchronised.

Settings

The menu items are: Bluetooth (submenus Switch phones,

Multipoint, Automatic connect.), Audio (submenus TTS, AUX-IN,

Mobile audio, Installation, Equalizer), Display (submenus Sleep

mode, Brightness), Device (submenus Language, Factory set-

tings, Version info).

With the Switch phones function, you can change the priorities of

both connected telephones. Both mobile phones are disconnected and

are then connected again the other way round. This can take a few

seconds. Press the home button once to activate the CC 9058. Press

and hold the home button to switch the priority of the phones. Once

the phones have been successfully switched you will hear a beep.

Note:

This function is only available if the multipoint function has X

been activated.