USER Manual Owner's manual

21
Equalizer
When playing music we have access to the equalizer - a pack of filters that are used to boost or sup-
press a particular frequency range of sound and to control volume adjustment.
In order to avoid glare when driving at night, Sleep mode can be activated. In sleep mode, the display
will turn off after either 15, 30, 60 or 90 seconds. Press the home button to return to active mode.
When a call is incoming, the HFCK activates the display automatically.
In the Brightness menu, the intensity of the light diodes in the display can be changed. Use the
horizontal buttons for this.
You can select the Menu language upon commissioning, following software updates or after loading
the factory settings.
If you have changed settings and the HFCK is not working as desired then you can return the HFCK
to factory settings with the Factory settings function.
Under Version info, you can see information on the software and hardware installed on the HFCK.
If the device is not yet built into the vehicle, the update can be implemented anywhere. For this pur-
pose, connect the electronic box with a PC/Laptop using the USB cable. If the device is already built
into the vehicle, please note that the device will only be detected by a PC/Laptop if no power supply is
active within the vehicle. Switch off engine and ignition and connect the device with
a PC/Laptop using the USB cable. Update Manager software and the relevant Firmware can be found
on the product page in the internet at www.bury.com.
Note:
Do not switch off the power supply to the HFCK during the update. X
We recommend that the update of the FSE be implemented by a BURY specialist dealer. X
Find your nearest specialist dealer under www.bury.com.