USER Manual Owner's manual

5. Connections at electronic box

The other components of the hands-free car kit are connected to the electronic box. You can find the

following connections:

Connection possibilities:

1 CHARGING PORT: Micro USB socket to connect the extension cable - the charging cable

or an optional update cable can be connected there

2 PWR/LSP/LINE OUT: 24-pin socket for the connection of the molex jack from the ISO cable harness,

used as power supply of the hands-free car kit outputs music and voice (telephone)

3 MICROPHONE: Connection for external microphone

4 LINE IN: Connection for AUX-IN cable for inputting of music

5 DISPLAY: Connection for display (if present)

6 REMOTE CONTROL: Connection for remote control with 3 buttons display (if present)

1 - CHARGING PORT

An extension cable is connected to connection no. 1 (micro USB socket). You can connect a charger or

your mobile phone to the other end of the cable. Connection of the BURY ChargingCradle Universal

isoptional.

2 - PWR/LSP/LINE OUT

The hands-free car kit in the vehicle is connected to the car radio with the ISO cable harness. If the

radio has ISO socket at its backside, the installation can be done without additional installation mate-

rial. If not, certain adapters, e.g. ISO2CAR or AUDIO2CAR, can be ordered from an authorised dealer

for the respective radio or vehicle make.