Operation Manual

9
5. Connections on the electronics box
The additional components of the hands-free car kit are connected to the electronics box. The follow-
ing connections are provided:
Connection options:
1 Power supply / Mute
2 basePlate System 9 adapted for CC 9060 Time
3 Internal loudspeaker switch box (with or without an internal switch box, depending on version)
4 External loudspeaker
5 Mikrophone
6 AUX Out
7 Monitor / Touch screen
Connection 1 - Power supply / Mute
Version 1:
Refer to the separate chapter: Installation of the audio switch box AC 5120
Note:
If the DIN ISO plug of the AC 5120 does not fit in your vehicle, numerous adapters are X
available from dealers.
Version 2 and 3:
The power supply of the hands-free car kit is established via a 4-core cable. Connect the black (clamp
31 – minus), the red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus) to the
power supply of your radio (where required via the cigarette lighter or the fuse box). After connection
to the counterpart, the yellow cable provides for radio muting during a phone conversation. Please
connect the white Molex connector with connection 1.