User's Manual

Installation of the hands-free car kit

speaker should be on the passenger side of the vehicle in order to pro-

vide sufficient distance from the microphone and to prevent possible

echoes from occurring. The jack plug remains unused during the use of

the internal loudspeaker switch box.

Version 2, with external loudspeaker switch box:

Refer to separate chapter:

Installation of the audio switch box AC 5120

4 - Speaker output

Please connect the 3.5 mm jack plug of the external BURY loudspeaker

(available as an accessory) to this socket.

5 - Microphone input

This is where you plug in the microphone jack. After connection 3 has

already been occupied use the rider. This ensures that neither of the

jacks is able to loosen as a result of vibrations.

6 - AUX-Out connection

Stereo music is output at connection 2. Here you can connect the AUX-

In input of your radio (if existent) via adapters available at local retai-

lers. For the connection to the hands-free car kit, the adapter must

have a 3.5 mm stereo jack. Depending on the car radio, the other end

must be selected otherwise. If your radio does not have an AUX-In, you

can use the car CD/MP3 adapter from the BURY accessories programme

to enable the reproduction of music via your radio.

7 - Monitor jack

Please plug the 9 pole plug of the monitor connection cable into this

jack. Tighten at least one of the two fixing screws hand-tight so that

this plug cannot become unplugged as a result of vibrations.