User's Manual

6. Installation of the audio switchbox AC 5120

With the AC 5120 speaker switchbox, you get the possibility of being able to mute the feedback of your

car radio / CD player etc. and to transfer the voice output of your conversation partner during a tele-

phone call to your vehicle’s speakers. This means that the installation of additional speakers isn‘t re-

quired. If your radio has a mute function, then the vehicle speakers are turned onto mute using the

radio. If your car radio doesn‘t have this function, then the signals will be suppressed by the speaker

switchbox. You can use the AC 5120 through the connections that your BURY hands free car kit offers,

which guarantee voltage supply via molex plugs and also have a speaker output.

If you want to make a telephone call in the hands-free mode, your car radio will be automatically swit-

ched on to mute (for the exact operation of your hands free car kit, please read your HFCK user ma-

nual). The Audio switchbox now uses one or two loudspeakers in your car for the telephone conversa-

tion, even if your radio is switched off. This function will be automatically activated after the installati-

on of the unit, there are no subsequent manual settings required.

Some mobile phones do not support a radio mute function. Please read your telephone user manual

for more details. You can find out more detailed information at your specialist retailer, in the internet

under www.bury.com, or over our telephone hotline.

After checking that all the cable lengths are sufficient, decide where you are able to attach the Audio

switchbox. Now secure the Audio switchbox so that it isn’t able to flap about and/or rattle against other

parts of your vehicle.

Connect the white power out cable connector (1) of your Audio switchbox to the power supply socket

of your hands-free kit. Now connect the audio switchbox plug (3) to the hands-free car kit. (The other,

smaller box is used by the plug for the microphone.)