User's Manual

Operating guidelines

8. Switch-on

If the power supply of the hands-free car kit (HFCK) is connected pro-

perly, the HFCK is activated after having started the ignition. The dis-

play is switched on and a short high sound is audible.

In the delivery status an identification of a mobile phone has not been

saved. (cf. chapter: Establishing a

Bluetooth

connection).

In case of a successfully established connection, a long high sound is

audible. The name of the connected mobile phone is displayed and data

from the phone book (SIM-card) and from the address book (telephone

directory) are then transmitted to the HFCK. Depending on the number

of data stored, this could take some seconds. If the synchronisation of

the phone book is interrupted by an incoming call, it may occur that not

all entries have been transmitted. In this case, the phone book should

be synchronised manually (cf. chapter: menu navigation).

9. Establishing a

Bluetooth

connection

If you wish to establish a

Bluetooth

connection for the first time, you

have to activate the

Bluetooth

function of your mobile phone and

search for

Bluetooth

devices. In this case, search for a device labelled

„CC 9055“. If several devices were identified, please select the HFCK

and enter the PIN number 1234. The

Bluetooth

connection (pairing)

will then be established between your mobile phone and the HFCK. The

HFCK supports the profiles „hands-free operation“ and „A2DP“. Please

set your mobile phone accordingly or check whether these profiles are

supported.