User's Manual

Operating guidelines

Music

If your mobile telephone possesses the Bluetooth profile A2DP, you can

play music (e.g. MP3 files) in stereo quality via the HFCK. It is important

to play the music title selected respectively on the HFCK via the func-

tion ‚play via...‘. As the menu navigation of the manufacturers of mobile

telephones differs considerably, the designation of the selection ‚...

Bluetooth-stereo-headset‘ may vary. If you establish this setting, the

music is played via the sound system connected to the HFCK.

If you activate the music function via the touch screen, an interface

appears in the display with which you can change the volume level and

either play back, stop or skip music tracks.

If you already have a mobile telephone connected in the hands-free

mode (auto symbol) and you now play back music from either the same

or a second telephone, the musical note appears in the status bar and

the music will be played back.

In the music player you have the option of disconnecting the connec-

tions to the telephones. The mobile phone which is connected with the

HFCK in the hands-free mode can be disconnected using symbol 1. The

second symbol disconnects the A2SP connection and the playback of

the music via the HFCK is stopped.

If you receive a call, the playback of the music automatically pauses.

The music player fades out and you are able to see the screen with the

incoming call.

Bluetooth

In the

Bluetooth

menu item, you can make the HFCK list already

known telephones, connect these in the hands-free mode (HF) or mu-

sic mode (A2DP), or completely delete recognised telephones. Under

the point device information you can access device information about

the current firmware which is installed on the device.

If you activate the automatic connection then the HFCK continually

tries to connect with the recognised mobile telephones after being

switched on. If you want to link up a new mobile telephone with the

HFCK, you must disconnect the automatic search beforehand. To do

this, press down on the Automatic Connection symbol.