User's Manual

9
5. Connecting the Electronic box
The additional components of the hands-free car kit are connected to
the electronics box. The following connections are provided:
1 - Power supply
Version 1, with integrated loudspeaker switch box:
The power supply of the hands-free car kit is established via a 4-core
cable. Connect the black (clamp 31 – minus), the red (clamp 30 – stea-
dy plus) and the blue cable (clamp 15 – ignition plus) to the power
supply of your radio (where required via the cigarette lighter or the fuse
box). After connection to the counterpart, the yellow cable provides for
radio muting during a phone conversation. Please connect the white
Molex connector with connection 1.
Attention:
If you also connect the blue cable to clamp 30, the hands- X
free car kit will be permanently supplied with power. If the
vehicle is not running for a longer period, this could lead to
a discharge of the car battery.
Version 2, with external loudspeaker switch box:
Refer to the separate chapter:
Installation of the audio switch box AC 5120
2 - System 9 Socket
Socket for connection of the basePlate suitable for the CC 9055 from
the System 9.
3 - Voice output of the hands-free car kit
Version 1, with integrated loudspeaker switch box:
The cable provided serves the purpose of transferring the voice output
to one of the loudspeakers in the car. In the best case scenario, this