Operation Manual

17
Some mobile phones support these categories only partly, however, or
not at all. To nevertheless display the telephone numbers, unknown
entries are listed within your contacts using the <Number> category.
You get a maximum of just one number from the SIM card, however
(this is always designated with SIM), and four numbers from the tele-
phone memory. If categories are only partly supported, the listing can
subsequently be mixed. Example:
Private
+44...
Mobile
+44...
Number 1
+44...
Number 2
+44...
SIM
+44...
If you say only „NUMBER“, all stored entries under this name will be
read aloud. This command is not active in the event of operation via the
Touchscreen.
In case you have stored more than one telephone number under a
contact name, you can also directly call through the category, e.g.
„DIAL JOE BLOGGS HOME“.
In addition you can allocate a phonebook entry with an own voice com-
mand (voice tag). This is recommended for names which are difficult to
pronounce. In these instances, the use of nicknames or abbreviations
is recommended.
Clearly speak the command into the microphone, the HFCK repeats this
and you can then make a call to the desired discussion partner from the
head menu with e.g. „CALL CUSTOMER ONE“.
In all the HFCK can store 150 voice commands. This voice command
(voice tag) is valid for all numbers which are allocated to this contact
name. A corresponding inquiry follows about which of these numbers
you want to call.
Note:
In order to make voice recognition easier for the HFCK, X
please do not use voice commands for your voice com-
mands (voice tags) which are also used by the HFCK.
Dial number 1
Number
Voicetag
Store
Delete