Operation Manual

27
You can also import the telephone book manually here once more, if,
for example, you saved a new telephone number / contact in your mo-
bile phone during a
Bluetooth with the HFCK.
If the telephone book on your mobile phone has only been partially
loaded, you are able to send the data from your telephone book to the
HFCK via the
Bluetooth OPProtocol. The requirement for this is that the
signature of the mobile phone has already been saved in the telephones
list and your mobile telephone also has this option.
Disconnect the
Bluetooth connection between the mobile phone and
the HFCK. Open the telephone or address book on your mobile tele-
phone. Next, select a function with which you are able to send all of the
contacts to the HFCK via
Bluetooth . The designations can differ depen-
ding on the mobile phone. A message window appears on the display
of the HFCK. You are able to completely decline the received data, add
it to the telephone book on the HFCK, or completely replace the HFCK
telephone book data with the new data. If you do not select any of the
three options within 10 seconds, the action is cancelled.
If data is added or replaced, the automatic synchronisation of the HFCK
telephone book is deactivated. You are also no longer able to load the
telephone book manually. Only the deletion of the mobile phone from
the list of telephones and the renewed saving of the signature make the
automatic synchronisation for your mobile phone possible again.
Under the System heading, you receive information about the soft-
ware and hardware installed in the HFCK under Version info. If a new
item of firmware should become available for the HFCK, then under the
menu item Software update and using the BURY Update Suite, you
are able to update the HFCK.
Note:
Before proceeding with the update, make sure that the X
system has enough battery power left or that there is a
permanent power supply.
If you have changed certain settings but the HFCK doesn’t work in the
way in which you wanted it to, then you can reset the HFCK to the
settings which were stored in it when you received it using the
Factory setting function.
Sync phone book
System
Version info
Software update
Factory setting