Operation Manual

8
Installation of the hands-free car kit
You can fix the CV 9040 Plus into the hang-up cup through the underside of the former. There are two
small catches on the sides of the hang-up cup which snap into place when the HFCK is in the correct
position. This catch mechanism means that the HFCK is safe from vibrations in the hang-up cup when
driving.
It is easy to remove the HFCK. Just pull the HFCK and press against the hang-up cup or sun visor clip.
Important:
The hang-up cup can only be mounted once using the enclosed mounting materials. X
Careless removal of the hang-up cup can lead to damage to the adhesive pads or to the
dash board.
Depending on the type, properties and maintenance of the dash board surface, this X
surface can become discoloured over time. The adhesive areas are usually not affected
by this and this would be visible later on.