Operation Manual

13
11b. Transferring Calls
Introduction
Transferring calls is to be understood as being the acceptance
of a call during a telephone call and alternating between two
conversations.
Please note:
The functions described in chapters 11b and 11c are ex
-
clusively valid for incoming calls.
Please remember that your range of functions can vary
depending on the type of mobile phone. Please find the
relevant details in the instructions manual for your mobile
phone.
If you receive another call during an active telephone conversation, you
will be informed of it via an acoustic signal. You now have the option of
either rejecting the call
(the red symbol) or accepting the call (the
green symbol).
If you accept the call your previous call will be put on hold. Your con-
versational partner will be indicated with
.
You now have the following options
1. Using swap you can switch between your
different callers.
2. You can reject the active Call
.
3. You can reject the held call
.
4. You can activate the private mode
.
(also see chapter 11a)
5. You can activate the mute
.
(also see chapter 11a)
6. You can activate the keypad
.
(also see chapter 11a)

