Operation Manual

The hands-free car kit has an integrated rechargeable battery which

remains activated for approx. 50 hours when fully loaded. The battery

guarantees up to 3 hours

of hands-free talking without the need for

recharging. These values may differ depending on the settings and the

use of the hands-free car kit.

The battery can be charged in your vehicle using the 12V/24V cable. A

100-240V power cord is also available as an accessory - so that you are

also able to charge up the battery via a mains connection at home, or

in your hotel room for instance. The instructions below refer to both of

these options throughout.

Please avoid charging the battery inside the vehicle in direct sunlight

and the high interior temperatures which can rapidly be reached in

parked vehicles. In such cases, please remove the hands-free car kit

from the cradle and place it either in the door glove pocket or the glove

box.

Please comply with the following temperature levels:

- Storage between -20 and +45 degrees Celsius

- Charging between 0 and +45 degrees Celsius

- Use between -10 and +60 degrees Celsius

If you do not comply with these temperature levels then the battery

can get damaged and the it is possible that the hands-free kit will fail to

work.

To fully charge the battery for the first time you should connect plug it

into a source of electricity for approx. 6 hours without interruption.

You connect the charging cable to the socket on the case. During the

charging procedure the status display illuminates in red, with a comple

tely charged battery, green. You also receive a message telling you that

the battery is charged.

The charging status of the battery is displayed to you in the upper right

hand section of the display. When it is fully charged, the battery symbol

is full, otherwise it is empty.

If the battery capacity is getting low, the symbol flashes more and

more quickly and you receive a corresponding reminder on the dis

play.

Please note:

Only carry out a system update with the power supply

unit connected.



4. Instructions on battery