Operation Manual

8
Installation of the hands-free car kit
2. Mounting on the dash board
a) Stick the enclosed pads onto the hang-up cup. (see illustrations
1 & 2).
Important:
The hang up cup can only be affixed once, damage may
occur to the adhesive surface if it is removed. It is also
possible that depending on the structure and consistency,
with strong temperature variations, the surface may deco
-
lour during subsequent use.

Illustration 1 Illustration 2
b) Now select a suitable space on the dashboard, remove the protec
-
tive paper from the adhesive pads (see illustration 3) and then firmly
fasten the hang-up cup to its intended place (see illustrations 4 & 5).
After this you can install the display.
Illustration 3
Illustration 5
Illustration 4