Operating instructions

14
Operating guidelines
7. Establishing a Bluetooth connection
first time, you have to activate the Bluetooth function of your mobile phone and search for
Bluetooth devices. In this case, search for a device labelled „BURY EasyTouch Pro“.If several de-
vices were identified, please select the HFCK and enter the PIN number „1234“. The
Bluetooth
connection (pairing) will then be established between your mobile phone and the HFCK. It is pos-
sible that you will also have to click on ‚connect‘ or ‚allow data transfer‘ on your mobile phone if you
want to be able to make a connection.
If it is not possible to establish a connection, please check and update the software release
(firmware) of your mobile phone or of the HFCK. You will find an overview dealing with this subject
on the Internet at www.bury.com.
In addition it is possible that you must delete all devices connected to your mobile phone first in
order to enable a correct identification of the HFCK and the establishment of a connection.
Note:
If the rechargeable battery of the mobile phone is low, it is sometimes not possible X
to establish a
Bluetooth connection.
In the internet you can find an overview with a large number of mobile telephones X
which have been tested with this hands-free car kit. Please note, however, the use of
firmware which deviates from the list and is installed on a listed mobile telephone can
lead to the fact that certain displays and functions are no longer possible or only pos-
sible to a limited extent.