Operating instructions

Installation of the hands-free car kit

Attention:

If you also connect the blue cable to clamp 30 (steady X

positive), the HFCK will be permanently supplied with

power. If the vehicle is not running for a longer period, this

could lead to a discharge of the car battery.

If you deviate from the specified connection descrip- X

tions it may be the case that certain functions on the HFCK

(e.g. the on-call duty) will not function correctly.

Installation instructions for the fuses

Please cut through the red, the black and the blue cable by means of a wire cutter or scissors. Now

insert the two endings of the red cable resulting from the cut into one of the binders, then close it. If

you hear two clicking noises, the clamp snapped in properly. Now insert one of the fuses and then

repeat the procedure with the other cables.

2 - Connection for System 9 basePlate compatible with the BURY Smart

This is where you connect the basePlate for the System 9. This basePlate is specially adapted for the

electronics box of the HFCK. The basePlate is supplied with power via the electronics box. You can

charge your mobile phone here and also leave it here for safekeeping.