Operating instructions

Installation of the hands-free car kit

4 - Voice output of the hands-free car kit

Version 1:

Refer to separate chapter: Installation of the audio switch box

AC 5120

Version 2:

Connect the external loudspeaker here if you do not want to or are not

able to make use of the vehicle’s own sound system. When installing

the loudspeaker, make sure it is positioned the correct distance from

the microphone.

Version 3:

With version 3, this connection remains unused. Please refer to the

description for connection 3.

5 - Microphone input

This is where you plug in the microphone jack. After connection 3 has

already been occupied use the rider. This ensures that neither of the

jacks is able to loosen as a result of vibrations.

6 - AUX-Out connection

Stereo music is output at connection 2. Here you can connect the AUX-

In input of your radio (if existent) via adapters available at local retai-

lers. For the connection to the hands-free car kit, the adapter must

have a 3.5 mm stereo jack. Depending on the car radio, the other end

must be selected otherwise. If your radio does not have an AUX-In, you

can use the car CD/MP3 adapter from the BURY accessories programme

to enable the reproduction of music via your radio.

7 - Monitor jack

Please plug the 9 pole plug of the monitor connection cable into this

jack. Tighten at least one of the two fixing screws hand-tight so that

this plug cannot become unplugged as a result of vibrations.