Operating instructions

Operating guidelines

command. In certain situations, however, with an incoming call and

activated voice recognition for instance, the HFCK will start the voice

control system automatically. The HFCK signals that it is ready to recei-

ve a command by emitting an acoustic signal.

If you aren’t sure of the right command to use, then simply state

„HELP / WHAT CAN I SAY“. The HFCK will then read out the com-

mands available for the particular menu in which you currently find

yourself. If the HFCK fails to understand one of your commands, or the

particular option isn’t available, the help function will start automatical-

ly and list the possible commands.

Please remember that certain commands are only available if a tele-

phone is connected with the HFCK. When entering voice commands,

please ensure you speak naturally, clearly and at a regular speed.

Note:

With the use of the voice control it is recommended to X

turn down the volume of components which are indepen-

dent of the audio system (e.g. a navigation system) or to

switch off the broadcast of traffic jam warnings in order to

avoid unintended voice entries.

In addition to these commands, the HFCK recognises the numbers from

zero to nine. Numbers which are larger than nine must be spoken indi-

vidually (e.g. 10 = one, zero). To search in the phone book, the HFCK

recognises the letters „A“ to „Z“ as well as the NATO alphabet. For the

entry of telephone numbers abroad, the command „PLUS“ is also

available.

When using voice control, in all menus these four commands are

always available:

Cancel

Help

Back

Head menu

breaks off the

current action

back to head menu

one step back

names all commands which are

available