Operating instructions

13. Accepting, making, ending calls

You will be alerted of an incoming call via the voice output and the ring

tone. Your vehicle‘s sound system will switch onto mute. If the caller

sends their telephone number with the call, this will be shown in the

display unless the number is saved in your phone. If an entry for the

number is saved in your phone, then the name of the caller will be read

out. If the caller hides their number, this will be indicated in the display.

In the standard setting, you can only accept or decline an incoming call

via the touchscreen. If you would like to accept the call, simply press

down on the symbol on the left. If you don‘t want to accept the call,

please press the symbol on the right.

During the call, you have the possibility to regulate the volume of the

voice of your discussion partner through the minus(-) or p l u s (+) field.

By pressing down in the centre of the display you reach a sub menu.

Here, you are able to select a Keypad, with which you are able to send

DTMF tones (e.g. to check on your mailbox).

The Private mode is an additional sub menu item. If you activate this,

the telephone call is transferred by the HFCK to your mobile phone and

it is no longer possible to hear the voice output of your conversational

partner over the car‘s loudspeakers.

Note:

Please comply with the country-specific laws concerning X

in-car telephone calls.

With the sub menu item Mute, the microphone in your vehicle is mut-

ed. You are then able to communicate with a passenger, for instance,

without the person who is calling you being able to hear you.

To end a telephone call, press down and hold on the centre of the dis-

play for a few seconds.

Incoming call

Active call