Operating instructions

5. Connections on the electronics box

The additional components of the HFCK are connected to the electronics box. The following connec-

tions are provided:

Connection options:

1 Power supply

2 basePlate System 9 adapted for BURY Smart

3 Internal loudspeaker switch box

(with or without an internal switch box, depending on version)

4 External loudspeaker

5 Mikrophone

6 Aux Out

7 Monitor

1 - Power supply

Version 1:

Refer to the separate chapter: Installation of the audio switch box AC 5120

Note:

If the DIN ISO plug of the AC 5120 does not fit in your vehicle, numerous adapters are X

available from dealers.

Version 2 and 3:

The power supply of the hands-free car kit is established via a 4-core cable (no. 6). Connect the black

(clamp 31 – minus), the red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus) to

the power supply of your radio (where required via the cigarette lighter or the fuse box). After connec-

tion to the counterpart, the yellow cable provides for radio muting during a phone conversation. Please

connect the white Molex connector with connection 1.