Operating Instructions

11
Cleaning and Maintenance
C
ustomer Helpline 0345 257 7271
CAUTION - Make sure the oven and hobs are
turned off prior to commencing any cleaning. Make
sure all parts have been allowed to cool to prevent
the risk of burning.
Interior cleaning
IMPORTANT - Do not use steam cleaners when
cleaning the oven.
General cleaning of the interior surfaces may be•
conducted using a wet cloth and soapy water.
Avoid using harsh abrasive cream and/or•
powder based cleaners.
Use an approved oven cleaner periodically or•
when the oven interior is particularly dirty.
In order to prevent damage to your appliance•
always test cleaners on small section fi rst and
follow the manufactures instructions for use.
Exterior cleaning
Use a wet cloth and mild detergent on metallic•
and enamelled surfaces.
Use a glass cleaner on the exterior surfaces of•
glass windows and doors.
Always follow the cleaner manufacturer’s•
instructions.
IMPORTANT – Do not use abrasive cleaners or
scouring pads as this may damage the enamel
surfaces and shorten the life of the appliance.
Changing the oven light
Before replacing the bulb disconnect the1.
appliance from the electrical supply.
Make sure that the oven has had suffi cient time2.
to cool down before opening the oven door.
Remove the glass protective cover by twisting it3.
anticlockwise, taking care not to let it drop.
Remove the lamp by twisting it anticlockwise,4.
taking care not to let it drop.
The replacement lamp 5. must conform to the
following:
25 Watt 230V, 50 Hz, E14 resistant to high•
temperature (300°C)
Part number 32011563 -Oven Light 230V.•
This bulb can be purchased from your•
authorised service agent.
Replace the lamp.6.
Replace the glass protective cover.7.
Check the light comes on when you use the8.
oven.
Figure 11
glass protective cover
Cleaning and maintenance
WARNING- Fit the grid correctly
into any rack in
the oven cavity and push it to
the end.
corresponding