Instruction Manual

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
26
Functions
Simple everyday use
Functions
Thermostat settings
• Before switching on, place the appliance in an
upright position and wait at least three hours
without moving the appliance. This will give
the freezing circuit time to settle and operate
efficiently.
• Clean the appliance thoroughly, especially
the interior, before use (see Cleaning and
Maintenance).
Warning: Installation of the appliance and electrical
connections must be carried out by a qualified
technician in accordance with the installation
manual and local regulations.
• The procedure for installation the appliance
into the kitchen unit is given in the installation
section of this information booklet. This
product is only intended to be used in proper
kitchen units.
• The appliance must be connected with a
properly installed fused socket. Power supply
(AC) and voltage at the operating point must
comply with the details on the name plate of
the appliance (the name plate is located on
the inside-left of the appliance).
• Insert the plug into a socket with an efficient
ground connection. If the socket has
no ground contact or the plug does not
match, we suggest you to call an authorised
electrician for assistance.
• The manufacturer is not responsible for
failure to complete the ground connection as
described in this booklet.
• There can be an odour when you first switch.
• The freezer thermostat automatically
regulates the inside temperature of the
compartments. By rotating the knob from
positions 1 to 5, colder temperatures can
be obtained. The " " position shows the
thermostat is closed and no cooling will be
available.
Freezer Thermostat Setting;
: The appliance is switched off.
1-2: For short-term storage of food in the
freezer compartment, set the knob between
the minimum and medium position.
3-4: For long-term storage of food in the freezer
compartment, set knob to the medium
position.
5: For freezing fresh food. The appliance will run
for colder temperatures.
If your freezer is not cold enough
• Temperature adjustments should be made
according to the frequency of door openings
and the quantity of food kept inside the
freezer.
• Your freezer should be operated up to 24
hours according to the ambient temperature
without interruption after being plugged in
to be completely cooled. Do not open door
of your freezer frequently and do not place
much food inside it in this period.
• During power cut, to prevent any compressor
problem you should unplug the freezer.
You should delay pluging in 5 – 10 minutes
after your power supply returns. 0f you plug
out the freezer for a reason you should wait
at least 5 min to replug. It is important for
avoiding damage to freezer's components.
• Your freezer is designed to operate in the
ambient temperature intervals according to
the climate class stated on the information
label. In terms of cooling effectiveness, we
do not recommend operating your freezer
outside of the stated temperature values.
• This equipment is designed for use at an
ambient temperature within the 10°C - 32°C
range.
Climate Class Ambient Temperature
o
C
T Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN Between 10 and 32 (°C)