Brochure

ManualsBrandsC&D Valve ManualsCopper Saddle ValvesBraze On Self Piercing Copper Saddle Valve for 5/16" OD Tube (6 Pack)

1

2

3

4

5

6

7

8

9

9

C&D Valve | Product Catalog | sales@cdvalve.com | 800.654.9233

PART# CD8414 PKG QTY: 2

For 1/4” copper tube

PART# CD8416 PKG QTY: 2

For 5/16” copper tube

PART# CD8438 PKG QTY: 2

For 3/8” copper tube

PART# CD8412 PKG QTY: 2

For 1/2” copper tube

PART# CD8458 PKG QTY: 2

For 5/8” copper tube

PART# CD5421 PKG QTY: 2

5/16” x 2” refrigeration tube

PART# CD8434 PKG QTY: 2

For 3/4” copper tube

PART# CD8478 PKG QTY: 2

For 7/8” copper tube

PART# CD8420 PKG QTY: 2

1/4” x 3” tube, expanded to

1/4” ID on one end

PART# CD8425 PKG QTY: 2

5/16” x 3” tube, expanded to

5/16” on one end

PART# CD8505 PKG QTY: 2

5/16” ID and 3/8” OD

PART# CD8506 PKG QTY: 2

3/8” ID and 1/2” OD

1/4” ID and 5/16” OD

will service 1/4”, 5/16”, 3/8”

PART# CD8426 PKG QTY: 2

3/8” x 3” tube, expanded to

3/8” ID on one end

PART# CD8427 PKG QTY: 2

1/2” x 3” tube, expanded to

1/2” ID on one end

PART# CD8428 PKG QTY: 1

5/8” x 3” tube, expanded to

5/8” ID on one end

PART# CD8429 PKG QTY: 1

3/4” x 3” tube, expanded to

3/4” ID on one end

PART# CD8431 PKG QTY: 1

7/8” x 3” tube, expanded to

3/4” ID on one end

COPPER ACCESS TEES

GENERAL

SPECIFICATIONS

The 84 TS Series offers two styles

of copper access tees in tubing

sizes 1/4” to 1-1/8”. Copper Tees

allow connection at each end and

require less solder than silver

solder, such as 95-5.

Copper Tees are preferable where

two line ends have not yet been

attached or where it is desirable to

cut a line rather than drive a hole

in an uncharged system. Copper

Tees can save time and money.

Tees with “CD” part numbers come

with CD2250 wrench cap. Change

“CD” to “CC” to substitute CD2245

standard brass cap.

INSTALLATION

INSTRUCTIONS

1. Remove cap and valve core

2. Clean tubing and apply ux

3. Insert tubing into each end and

braze into place

4. Replace valve core, tighten,

evacuate and charge system

5. Install cap when work is

complete

84 TS Series

5/16”

3/8”

1/4”