Brochure

11
C&D Valve | Product Catalog | [e-mail] | 800.654.9233
TECH TIP
Clamp-on line tap valves are a
quick and economical way to
temporarily access a refrigerant
system. After using line tap valves,
installing a permanent access tee
is recommended.
A line tap valve that is easy to use. Five individual sizes for special access jobs. Viton
®
gasket for
heat extremes.
The CD4338 and CD4358 line tap valves pierce with a needle which automatically retracts and back
seats when work is complete. The refrigerant line remains free of any restriction. No special installation
tools are needed because socket head screws and hex wrench are included with every valve. These
dependable and field-proven valves are easy to install and suitable with all refrigerants.
PART# CD2140 PKG QTY: 2
For 1/4” lines
PART# CD2160 PKG QTY: 2
For 5/16” lines
PART# CD2380 PKG QTY: 2
For 3/8” lines
PART# CD2120 PKG QTY: 2
For 1/2” lines
PART# CD2580 PKG QTY: 2
For 5/8” lines
PART# CD4358 PKG QTY: 1
Fits 1/2” and 5/8” tubes
PART# CD4338 PKG QTY: 1
Fits 1/4”, 5/16” and 3/8” tubes
1. Place aluminum channel on
line. Insert aluminum slide into
grooves on channel
2. Grip slide and channel with
pliers. Place steel pin in body
and screw into place
3. Holding grip on channel and
slides, tighten steel housing—
Unique torque action provides
permanent clamp
4. Continue to tighten steel
housing—Neoprene gasket
on pin gives long-life seal
CLAMP-ON SERVICE VALVES
B Series
Standard Line Tap Valve
® Viton is a registered trademark of DuPont