Brochure

ManualsBrandsC&D Valve ManualsCopper Saddle ValvesBraze On Self Piercing Copper Saddle Valve for 3/4" OD Tube (2 Pack)

13

C&D Valve | Product Catalog | sales@cdvalve.com | 800.654.9233

CORE REMOVAL TOOLS

Core Removal Tools

All accessory tools are compatible with CD3900, CD3910, CD3920, CD3930, and CD3956

PART# CD3090 PKG QTY: 1

Tube piercing attachment punches a hole

in copper tubing througha V-Series ﬁtting

for the installation of a core without loss of

refrigerant

PART# CD3910 PKG QTY: 1

Our original 1/4” ﬂare thumb screw

shut-off core removal tool—has 1/4” male

ﬂare side access port with brass cap

PART# CD5577 PKG QTY: 1

Valve core grappler and extractor –

removes core without loss of refrigerant

PART# CD3900 PKG QTY: 1

Same as the CD3910 except with no

side port—Works with all accessories

Shut-off valve with neoprene

sleeve expands, closing off

system after core is removed

1/4” Female Flare Coupler

o-ring sealing system

1/4” Male Flare—Hose may be attached,

shut-off valve opened, and vacuum pulled if desired

Grapple and extractor rod push down,

grab core, unscrew and pull up

TECH TIP

Have damaged threads or a

broken valve core?

Try our CRT thread chaser —

available individually or as a kit.

TUBE PIERCING

ATTACHMENT

Optional tool for CRT. With any

CRT and special access V-Series

tting, a tube can be pierced and a

core inserted into V tting below.

INSTRUCTIONS

Tube Piercing Attachment:

1. Braze V-Series tting onto line

2. Attach main body of CRT

to tting

3. Attach TPA to the CRT body,

screw down needle to pierce

hole in tubing until it bottoms

out – it will not go through the

other side of tube

4. Pull back TPA handle

5. Shut off system with CRT shut

off valve

6. Remove TPA from the CRT

7. Attach regular CRT rod with core

8. Open shut-off valve, screw core

into V tting and remove CRT

PART# CD3916 PKG QTY: 1

A thread chaser to clean and align the

internal threads of an access ﬁtting

PART# CD3917 PKG QTY: 1

CD3915 and CD3916 together as a kit

PART# CD3915 PKG QTY: 1

A pick to extract a broken core from a housing

without loss ofrefrigerant —has left hand threads