Owner`s manual

Fig.1

Select install location of the indoor unit

1. Obstruct should put away from the intake or outlet vent of the indoor unit so that the airflow can be

blown though all the room.

2. Make sure that the installation had accord with the requirement of the schematic diagram of

installation spaces.

3. Select the place where can stand 4 times of the weight of the indoor unit and would not increase the

operating noise and oscillate.

4. The horizontally of the installation place should be guaranteed.

5. Select the place where is easy to drain out the condensate water, and connect with outdoor unit.

Models

H(mm)

GKH18K3BI

230

GKH24K3BI

260

GKH36K3BI

GKH48K3BI

320

Indoor Unit Installation

INSTALLATION