Owner`s manual

☆ The drilling of holes in the ceiling must be done by the professional personnel.
Installation stands for main body of the unit
Ceiling
Above 20
Fig 1
Notes: The dimension for the ceiling openings with * marks can be as large as 910mm. But the
overlapping sections of the ceiling and the decorated surface boards should be maintained at no
less than 20mm.
E. Main body of hoisting air conditioner
Nut (supplied at scene)
Gasket (attachment)
Insert
Hoisting stand
Tighten (double nuts)
Gasket anchor board
(attachment)
[Fix the hoisting stand firmly ]
[Fix the gasket firmly ]
Center of the ceiling
opening
Install cardboard
Water lever
Bolt （ attachment ）
Polyethylene pipe
Bolt （ attachment ）
[Fix the install cardboard ]
Fig.2
1. The primary step for install the indoor unit.
☆ When attach the hoisting stand on hoisting screw, do use nut and gasket individually at the upper and
lower of the hoisting stand to fix it. The use of gasket anchor board can prevent gasket break off.
2. Use install cardboard
(160)
Bolt of one of the angle o
on the angle of the drain
f outlet
age slot
pipe is fix