User manual

Configuring Your Gateway

SMCD3GN2 Wireless Cable Modem User Manual

DSCP Remarking Menu

The DSCP Remarking menu lets you configure the Gateway’s DSCP remarking mode and

actions.

To access the Queue Settings menu, click QOS in the menu bar and then click the DSCP

Remarking submenu in the menu bar. Figure 29 shows an example of the menu.

Note: The DSCP Remarking submenu is not available in the menu bar if Enable QOS

Module is not checked in the QoS Settings menu (see page 39).

Figure 29. DSCP Remarking Menu

To configure DSCP remarking settings:

1. Check Enable DSCP Remarking.

2. Complete the options in the menu and refer to Table 8.

3. When you finish, click Apply.