User manual

Configuring Your Gateway
96
SMCD3GN2 Wireless Cable Modem User Manual
Configuring Syslog Entries
To have the Gateway add a syslog entry when traffic is blocked, attempts are made to
intrude onto the network, or local computers try to access blocked URLs:
1. In the Email/Syslog Alert menu, under Syslog Server Configuration, enter the syslog
server address.
2. Click Apply.
Configuring Alert Options
Using the options in the Alert Options area, you can configure the Gateway to send an
email to recipients you define in this menu and/or send entries to a syslog defined in this
menu if the Gateway detects an intrusion.
To configure the Gateway to send an email to the configured email addresses if it detects an
intrusion:
1. Perform steps 1 through 3 under “Configuring Email Alerts” on page 95.
2. Under Alert Options, check Send Email next to When intrusion is detected.
3. Click Apply.
To configure the Gateway to send an entry to a syslog if it detects an intrusion:
1. Perform step 1 under “Configuring Syslog Entries” on page 96.
2. Under Alert Options, check Send Syslog next to When intrusion is detected.
4. Click Apply.