User`s guide

INSTALLATION REQUIREMENTS/SPECIFICATIONS
2-14
RCV (yellow): Indicates that the repeater is receiving
a data packet on that segment.
CPU (flashing green): This LED alternates from red to green
during power up. After the boot is
complete, the LED flashes green. A
flashing green LED indicates normal
operation. A red LED indicates a fault
in the processor.
POWER SUPPLY REQUIREMENTS
Note: The MRXI has a universal power supply. This unit allows you to use
an input power from 85 to 264 VAC, 47-63 Hz.
Parameter Typical Worst
Value Case
Input Current: 0.5 A 0.75 A
Overload Protection - Output: (1) 2AG 1 amp fuse.
ENVIRONMENTAL REQUIREMENTS
Operating Temperature: +5° to +50° C
Non-operating Temperature: -30° to +90° C
Operating Humidity: 5 to 95% (non-condensing)
SAFETY
Designed in accordance with UL478, UL910, NEC 725-2(b), CSA,
IEC, TUV, VDE class A. Meets FCC part 15, Class A limits.
Warning: It is the responsibility of the person who sells the system to
which the MRXI will be a part to ensure that the total system meets
allowed limits of conducted and radiated emissions.