User`s guide

LOCAL MANAGEMENT
5-3
Table 5-1 Terminal Setup Requirements
5.1.1 Console Cable Configuration
Cabletron Systems supplies a console cable kit with the MRXI. This kit
includes an unshielded twisted pair cable with RJ-45 connectors on both
ends, an RJ-45 to 25 pin adapter, and an RJ-45 to 9 pin adapter. Use this
kit to attach the terminal to the RJ-45 CONSOLE port on the front panel
of the MRXI. Figure 5-2 shows the pin-out for both cables.
MENU FUNCTION SELECTION
Display Setup: Columns 80 Columns
Controls Interpret Controls
Auto Wrap No Auto Wrap
Test Cursor Cursor
General Setup: Mode 7 Bit Control
Cursor Keys Normal Cursor Keys
Communications
Setup:
Transmit Transmit = 9600
Receive Receive = Transmit
XOFF any option
Bits, Parity 8 Bits, No Parity
Stop Bit 1 Stop Bit
Local Echo No Local Echo
Port
DEC-423,
Data Leads only
Transmit any option
Auto Answerback No Auto Answerback
Keyboard Setup: Auto Repeat any option
Keyclick any option
Margin Bell Margin Bell
Warning Bell Warning Bell
Auto Answerback No Auto Answerback