User`s guide

SEHI USER’S GUIDE 6-1
CHAPTER 6
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access the
SEHI Local Management. It also explains how to use the Local
Management screens and commands.
Local Management supplies the tools to manage the SEHI and all of its
attached segments. It allows the user to:
• Assign an IP address and subnet mask.
• Select a default gateway.
• Control access to the SEHI through the community names
established in the Community Name Table.
• Designate which Network Management Workstations receive trap
messages from the device.
• Navigate through the Management Information Base (MIB) and
manage the objects within it from a remote location. Given the
appropriate security level, the MIB is accessible from the SEHI
through SNMP Tools.
Local Management also allows the user to manage each non-intelligent
stackable hub attached to the SEHI, and provides a Statistics screen to
view error, collision, and traffic statistics for the entire stack, individual
module, or individual port.