User`s guide

USING THE LOCAL MANAGEMENT SCREENS
SEHI USER’S GUIDE 6-13
To set the subnet mask:
1. Use the arrow keys to highlight the SubNET Mask field.
2. Enter the subnet mask into this field. The format for this entry is
XXX.XXX.XXX.XXX with values for XXX being from 0 to 255.
3. Press the Return key.
4. Use the arrow keys to highlight the SAVE option, then press the
Return key or F6. The “SAVED OK” message appears indicating that
the changes have been saved to memory.
Setting the Default Gateway
The Default Gateway field allows the user to describe the router through
which the SEHI will be forwarding IP packets.
To set the Default Gateway:
1. Use the arrow keys to highlight the Default Gateway field.
2. Enter the gateway’s default mask in this field. The format for this entry
is XXX.XXX.XXX.XXX with values for XXX being from 0 to 255.
3. Press the Return key. If your entry is accepted as a valid default
gateway, “OK” appears to the right of the field.
4. Use the arrow keys to highlight the SAVE option, then press the
Return key or F6. The “SAVED OK” message appears indicating that
the changes have been saved to memory.
The first time an attempt is made to exit the screen without
saving the changes, a “NOT SAVED?” message is displayed.
The edits are lost if the user proceeds to exit without saving
the changes.
NOTE