Instructions / Assembly

Side Mount

For both standard TSGB16 & TSGB24,

and the assembled versions: Fold

the outside tab on both ends of TSGB

backward 180° until it meets the blank

tab.

Fold forward.

Select desired box depth

and fold on that mark.

Bend back 180

Bend here for 2-1/8" box.

Bend here for 1-1/2" box.

Attach fastener to

side face of the metal

stud with screw gun.

Position outlet box

on bracket and install

with screw gun.

TSGB16

Select height for box center line.

Align on stud. Attach

screw through keyhole.

Hang from Keyhole.

Level and attach

opposite side.

May be used with CER4

as cable support.

Attach TEB23 box mount

at desired location.

CER4

TEB23

1. Can be mounted on face or inside the stud.

2. Can mount 1-1/2" or 2-1/8" deep boxes.

Notched and marked for easy identification and bending.

3. Requires only a screw gun to install.

4. Box attaches with self-tapping screws and is aligned

with the V-Groove so that the box is straight.

5. Eliminates movement of the box when used with flexible conduit,

ENT, MC, BX, or Non-metallic sheathed cable (NMC).

6. Allows multiple box mounting.

TECHNICAL SUPPORT:

www.erico.com

CFS300_D

INSTRUCTION SHEET

2 OF 2



