Specifications

114 IBM Voice Over Frame Relay Perform Guide
• {+} means any digit, any amount.
• {sX} means tagged field in Source Match Rule.
• {dX} means tagged field in Destination Match Rule.
Table 44. Match Rule/Route Rule/Output Rule Table for 9783 Tokyo
• $ means single decimal digit.
• IBM 9783 $ is analogous to IBM 2212 n wildcard.
• {40}{$$$} means location number 40 and 3-digit extension numbers to Yokohama.
• {50}{$$$} means location number 50 and 3-digit extension numbers to Chiba.
Table 45. Transaction Rule Table:0 for 9783 Tokyo
• The first row means that when Match dest rule 2 is {40}{$$$} Yokohama is
matched, and calls are routed using Route rule 1, which means circuit group
number 1 using Output rule 3 {d2} as the 3-digit extension number.
• The second row means that when Match dest rule 3 is {50}{$$$} Chiba is
matched, and calls are routed using Route rule 2, which means circuit group
number 2 using Output rule 3 {d2} as the 3-digit extension number.
4.2.4.7 Tokyo IBM 9783 Configuration
This section shows how to configure the 9783 for the above scenario.
Basic Configuration
Step 1: Before starting the configuration of the 9783 you should initialize to the
default configuration. This might take 5 minutes.
Index Match Rule Route Rule Output Rule
0 NONE All Voice adapters NONE
1{+}1{S1}
2 {40}{$$$} 2 {D1}
3 {50}{$$$} {D2}
Case Match Src Match Dest Route Output Src Output Dest
012113
113213
2
3
4
5
6
7
8
Local> U init
All configuration parameters will be reset to factory defaults
A unit reset will follow..OK to proceed [Y/N]? y
Local>