Specifications

Sample Scenarios 115
Step 2: Enable FRF.11 for the entire box. It needs a reboot, which will take 5
minutes.
Step 3: Define node ID. It needs a reboot,which will take 5 minutes.
Step 4: Define a name for the 9783 (optional) and change the console speed to
9600bps ( recommended for 9783). Communication will be disrupted.
Step 5: Define port A2 as the frame relay port. A2 is the B slot second port in the
9783.
Step 6: Define the clock mode as internal or external.
Step 7: Define a name for the 9783 (optional) and change the console speed to
9600 bps. 9600 bps is the recommended speed for the console. Once you
change the console speed, communication will be disrupted.
Step 8: Define the cable type.
Step 9: Define the LMI type.
Local> unit frame frf.11
Unit will be reset...OK to proceed [Y/N]? y
Local>
Local:FRAME-FMT> OK
Local>
Local> u ad 0.0.0.20
Unit will be taken offline...OK to proceed [Y/N]?
Local>
Local> co l 9783#B
Local:SYS-PROMPT> OK
Local:TOKYO> con rate 9600
Console communication will be disrupted...OK to proceed [Y/N]? y
Local :9783#B>
Local> data a2 mode frame
Local>
Local:DATA-MODE>
A2: OK.
Local> data a2 clock int
Local:DATA-CLOCKMODE>
A2: OK.
Local> data a2 rate 20480001
Local:DATA-RATE>
A2: OK
Local> data a2 interface V.35
Local:DATA_INTERFACE>
A2: OK
.Local> frame a2 lmi type rev
Local:FR-CFG-LMITYPE>
A2: OK