Specifications

116 IBM Voice Over Frame Relay Perform Guide
Step 10: Define the LMI mode network or user.
Step 11: Enable the data port A2.
Detailed Frame Relay Configuration (DLCI and Subchannel) for 9783
Step 1: Create DLCI 17 with Bundled option.
Step 2: Define CIR value = 64 kbps.
Step 3: Create Sub-DLCIs 4 and 5 for DLCI 17. Sub-DLCIs should always start
from 4.
Step 4: Create DLCI 19 with Bundled option.
Step 5: Define CIR value = 64kbps.
Step 6: Create Sub-DLCIs 4 and 5 for DLCI19. Sub-DLCIs should always start
from 4.
IBM 9783 Rules Configuration Steps
Configure call match rules for each telephone number in the network. Create
route table entries for your local voice ports as well as for each of the circuit
Local> frame a2 lmi mode network
Local:FR-CFG-LMIMODE>
A2: OK.
Local> da a2 on
Local:DATA-ONLINE>
A2: OK
Local> frame a2 dlci 17 create bundled
Local:FR-CREATE-PVC>
A2: OK
Local> frame a2 d 17 cir 64000
Local:FR-CFG-CIR>
A2: OK
Local> frame a2 d 17 sub 4 create
A2: OK
Local> frame a2 d 17 sub 5 create
Local:FR-CREATE-SUBCHAN>
A2: OK
Local> frame a2 dlci 17 create bundled
Local:FR-CREATE-PVC>
A2: OK
Local> frame a2 d 19 cir 64000
Local:FR-CFG-CIR>
A2: OK
Local> frame a2 d 19 sub 4 c
Local:FR-CREATE-SUBCHAN>
A2: OK
Local> frame a2 d 19 sub 5 c
Local:FR-CREATE-SUBCHAN>
A2: OK