Specifications

132 IBM Voice Over Frame Relay Perform Guide
Tokyo) using Output rule 4 {d1}{d2} as the location number and the extension
number.
4.2.5.9 9783 Configuration and Operation
This is a sample 9783 command sequence from scratch.
4.2.5.10 Basic Definition
1. Initialize default config. It needs to reboot, which takes 5 minutes.I
2. Enable FRF.11 for the entire box. It needs to reboot, which takes 5 minutes.
3. Define node ID. It needs to reboot, which takes 5 minutes,
1 Tokyo: 0.0.0.20, Osaka: 0.0.0.10
4. Define a name for the 9783 (optional) and change the console speed to 9600
bps. 9600 bps is the recommended speed for the console. Once you change
the console speed, communication will be disrupted.
1 Optionally, you can define the host name.
5. Define the port as a frame relay port (a2 means B slot and second port).
6. Define the clock mode as internal or external.
7. Define the physical access rate.
Local> U init
All configuration parameters will be reset to factory defaults
A unit reset will follow..OK to proceed [Y/N]? y
Local>
Local> unit frame frf.11
Unit will be reset...OK to proceed [Y/N]? y
Local>
Local:FRAME-FMT> OK
Local>
Local> u ad 0.0.0.20 1
Unit will be taken offline...OK to proceed [Y/N]?
Local>
Local> co l 9783-Tokyo 1
Local:SYS-PROMPT> OK
Local:TOKYO> con rate 9600
Console communication will be disrupted...OK to proceed [Y/N]? y
Local :9783-Tokyo>
Local> data a2 mode frame
Local>
Local:DATA-MODE>
A2: OK.
Local> data a2 clock int
Local:DATA-CLOCKMODE>
A2: OK.
Local> data a2 rate 64000
Local:DATA-RATE>
A2: OK