Specifications

Sample Scenarios 135
4. Call Translation Rule Table.
Table 60. Meaning of Call Trans 0 0 Mod 1 5 2 1 3
Circuit Group
1. Create Circuit Group 1 between 9783 Tokyo and 9783 Osaka.
2. Define max speed.
3. Define inbound table number 0 for circuit group 1.
4. Define remote Osaka 9783 node ID as 0.0.0.10.
1 Tokyo: 0.0.0.10, Osaka: 0.0.0.20
5. Define subchannel number 4 as process subchannel
6. Define subchannel numbers 5, 6 and 7 as payload(voice) subchannel
1 Having only subchannel 5, 6 and 7 means that only three calls go through in this
Circuit Group between Tokyo and Osaka using DLCI 16. It is possible to design
the total voice traffic volume using only the number of payload subchannels. If
Value Meaning
0 Translation table number (usually 0)
0 Translation table case number
1 Source addr match rule table entry
5 Destination addr match rule table entry
2 Route table entry
1 Source addr match table entry
3 Destination addr output rule entry
Local> call trans 0 0 mod 1 5 2 1 3
Local:TRANS-RULE> OK
Local> call trans 0 1 mod 1 4 1 1 4
Local:TRANS-RULE> OK
Local> cir 1 create
Local:CIR-GRP-CREATE> OK.
Local> cir 1 max 64000
Local:CIR-GRP-CIR> OK
Local> cir 1 inbound 0
Local:CIR-GRP-RULE> OK
Local> cir 1 connect 0.0.0.10 1
Local:CIR-GRP-NODE> OK
Local> cir 1 add proc a2:16:4
Local:CIRCUIT-ADD-CIR> OK
Local> cir 1 add 5 a2:16:51
Local:CIRCUIT-ADD-CIR> OK
Local> cir 1 add 6 a2:16:61
Local:CIRCUIT-ADD-CIR> OK
Local> cir 1 add 7 a2:16:7 1
Local:CIRCUIT-ADD-CIR> OK