Specifications

Sample Scenarios 139
4.2.6.3 Configuration Steps for 2212 and 9783
This section shows you how to configure the 2212s and 9783s discussed in the
above scenario.
2212 Yokohama Router Configuration
Step 1: The basic and frame relay configuration of the router.
8
Rule DLCI and
Subchannel for
Payload
DLCI and
Subchannel for
Processing
Dial
Match
Rule
NetworkOutput
Rule
Config (only)>SET HOSTNAME 2212-YOKOHAMA
Host name updated successfully
Config (only)>SET DATA-LINK FRAME-RELAY 0
Config (only)>NETWORK 0
Frame Relay user configuration
2212-YOKOHAMA FR 0 Config>SET CABLE V35 DTE
2212-YOKOHAMA FR 0 Config>ENABLE FRAGMENTATION
Specify the fragmentation type to be done [UNI/NNI Fragmentation]? end
Fragment size (50 to 8190) [256]?
Fragmented packet reassemby timer (3 to 10 seconds) [3]?
2212-YOKOHAMA FR 0 Config>ENABLE CIR-MONITOR
2212-YOKOHAMA FR 0 Config>DISABLE LMI
2212-YOKOHAMA FR 0 Config>ADD PERMANENT-VIRTUAL-CIRCUIT
Circuit number [16]?
Committed Information Rate (CIR) in bps [64000]?
Committed Burst Size (Bc) in bits [64000]?
Excess Burst Size (Be) in bits [0]?
Assign circuit name []? [To Tokyo]
Is circuit required for interface operation [N]?
Enable circuit for voice forwarding [N]?
Do you want to have end-to-end fragmentation performed [N]? y
Fragment size (50 to 8190) [256]?
Fragmented packet reassemby timer (3 to 10 seconds) [3]?
2212-YOKOHAMA FR 0 Config>EXIT