Specifications

150 IBM Voice Over Frame Relay Perform Guide
• The first row means that when Match dest rule 4 is {30}{$$$} Kobe is
matched,calls are routed using Route rule 2 that is circuit group number 2 (to
Kobe) using Output rule 3 {d2} as the extension number
• The second row means that when Match dest rule 4 is {40}{$$$} Yokohama is
matched,calls are routed using Route rule 1 that is circuit group number 1 (to
Tokyo) using Output rule 4 {d1}{d2} as the location number and the extension
number.
• The third row means that when Match dest rule 3 is {20}{$$$} Tokyo is
matched, calls are routed using Route rule 1 that is circuit group number 1 (to
Tokyo) using Output rule 4 {d1}{d2} as the location number and the 3-digit
extension.
4.2.6.7 Tokyo IBM 9783 Configuration
This section shows how to configure 9783 for the above scenario.
Basic Configuration
Step 1: Initialize the unit to its default configuration. This might take 5 minutes.
Step 2: Enable FRF.11 for the entire box. It needs a reboot, which will take 5
mintues.
Step 3: Define node ID. It needs a reboot, which will take 5 minutes.
Step 4: Define a name for the 9783 (optional) and change the console speed to
9600 bps. 9600 bps is the recommended speed for the console. Once you
change the console speed communication will be disrupted.
213114
3
4
5
6
7
8
Case Match Src Match Dest Route Output Src Output Dest
Local> U init
All configuration parameters will be reset to factory defaults
A unit reset will follow..OK to proceed [Y/N]? y
Local>
Local> unit frame frf.11
Unit will be reset...OK to proceed [Y/N]? y
Local>
Local:FRAME-FMT> OK
Local>
Local> u ad 0.0.0.20
Unit will be taken offline...OK to proceed [Y/N]?
Local>