Specifications

Sample Scenarios 151
Step 5: Define port A2 as a frame relay port. A2 is in the B slot second port of the
9783.
Step 6: Define the clock mode as internal or external.
Step 7: Define the speed of port A2. All rates from 75 to 2048000 can be entered.
2048000 is recommended since we are using back-to-back cabling.
Step 8: Define the cable type.
Step 9: Define the LMI type.
Step 10: Define the LMI mode as network or user.
Step 11: Enable the data port A2.
Detailed Frame Relay Configuration (DLCI and Subchannel) for 9783
Step 1: Create DLCI 16 with Bundled option.
Local> co l 9783#B
Local:SYS-PROMPT> OK
Local:TOKYO> con rate 9600
Console communication will be disrupted...OK to proceed [Y/N]? y
Local :9783#B>
Local> data a2 mode frame
Local>
Local:DATA-MODE>
A2: OK.
Local> data a2 clock int
Local:DATA-CLOCKMODE>
A2: OK.
Local> data a2 rate 64000
Local:DATA-RATE>
A2: OK
Local> data a2 interface V.35
Local:DATA_INTERFACE>
A2: OK
.Local> frame a2 lmi type rev
Local:FR-CFG-LMITYPE>
A2: OK
Local> frame a2 lmi mode network
Local:FR-CFG-LMIMODE>
A2: OK.
Local> da a2 on
Local:DATA-ONLINE>
A2: OK
Local> frame a2 dlci 16 create bundled
Local:FR-CREATE-PVC>
A2: OK