Specifications

Performance Tuning, and Monitoring 167
If a voice interface shows as disabled, but it does not show disabled from talk 6,
the most likely cause of this is that no call processing rules have been associated
with the interface, and thus it is disabled when the router boots.
5.3.1 The STATUS Command
The STATUS command provides the statistics for a particular voice interface. It
confirms the configuration of the node ID and local number. For the vocoder it
shows the negotiated suite and the rate. Recall that the 2212 supports rate
negotiation, so if the rate or suite shown here differs from what is configured from
talk 6, you have a mismatch more than likely with the other peer. The vocoder
packet size is the number of bytes in each vocoder packet. This is the size of the
compression output and does not include the FR header. The vocoder frame size
is the number of PCM samples in each vocoder frame.
+ CONFIGURATION
.... display of protocols, etc. removed to save space ...
9 Total Networks:
Net Interface MAC/Data-Link Hardware State
.... other interfaces removed to save space ...
5 Voice/0 Voice Voice Up
6 Voice/1 Voice Voice Disabled
7 Voice/2 Voice Voice Up
8 Voice/3 Voice Voice Up
2212-yokohama *TALK 5
CGW Operator Console
2212-yokohama +NETWORK 5
2212-yokohama Voice 0 Console>STATUS
Node ID : 1.0.0.1
Absolute Port Address : 00
Vocoder Suite Nuera Echo Canceller Filter
Vocoder Active ECELP Fax Demodulation Idle
Vocoder Rate 9600 Fax Modulation Idle
Vocoder Packet Size 18 Fax Type V.27 at 9600 bps
Vocoder Frame Size 120 Fax Last FCF 0
Last Received Dial Sequence : 102
Last Transmitted Dial Sequence :
Transmit Packets Receive Packets
Total 13301 Total 10820
Voice 13008 Voice 10498
CAS 172 CAS 228
DTMF 40 DTMF 26
FAX 0 FAX 0
Lost 1 Lost 0
2212-yokohama Voice 0 Console>