Specifications

Performance Tuning, and Monitoring 171
0x05 Circuit Inactive
0x06 Compatibility Mismatch
0x07 Inbound Translation Failed
0x08 Outbound Translation Failed
0x09 Remote Channel Busy
0x0A Remote Channel Not Responding
0x0B Outbound Time-Out
0x0C Inbound Time-Out
0x0D Idle
0x0E Pass-Through Failed
0x0F Max Hops Exceeded
Figure 60. Example of ELS for Local Call Routing
Figure 61. Example of Call Routing Failure
Figure 62. Example of Configuring Warning
Figure 60 shows the messages generated from a local call. You can see that the
messages sent are very similar to those generated for a remote call.
The messages in Figure 61 show that a call could not be routed. This problem
occurred because of a problem with call processing rules. When the configuration
was inspected there was a call processing rule for local calls from 101, but no
local rule existed from 102. It is very important that the call processing rules exist
in both directions.
00:00:16 VOIC.001: Call Setup recv nt 4 int Voice/0, trans nt 5 int Voice/1
DLCI 0 sub 0 cir 0 NID 1.0.0.1 Dest 102
00:00:16 VOIC.001: Call Connect recv nt 5 int Voice/1, trans nt 4 int Voice/0
DLCI 0 sub 0 cir 0 NID 1.0.0.2
00:00:18 VOIC.001: Call Answer recv nt 5 int Voice/1, trans nt 4 int Voice/0
DLCI 0 sub 0 cir 0 NID 1.0.0.2
00:00:22 VOIC.001: Call Release recv nt 4 int Voice/0, trans nt 5 int Voice/1
DLCI 0 sub 0 cir 0 NID 1.0.0.1 Cause 0
00:00:25 VOIC.001: Call Release recv nt 5 int Voice/1, trans nt 4 int Voice/0
DLCI 0 sub 0 cir 0 NID 1.0.0.2 Cause 1
00:01:21 VOIC.003: Call Setup recv nt 4 int Voice/0, disc unroutable
DLCI 0 sub 0 cir 0 NID 1.0.0.1 Dest 102
00:01:21 VOIC.002: Call Release trans nt 4 int Voice/0
DLCI 0 sub 0 cir 0 NID 1.0.0.1 Cause 10
00:01:22 VOIC.003: Call Release recv nt 4 int Voice/0, disc unroutable
DLCI 0 sub 0 cir 0 NID 1.0.0.1 Cause 1
00:00:03 VOIC.004: Cfg Warning: No Call Rules configed for nt 6 int Voice/1