Specifications

172 IBM Voice Over Frame Relay Perform Guide
Figure 62 shows the warning message that can occur when the router is booting.
This message was warning that no call processing rules existed for network 6.
This will cause the interface to show as disabled when viewed from talk 5.
Figure 63. Turn Tracing on for Interface
Figure 64. Display Trace via ELS
There is a trace facility for tracing voice messages. This is enabled on a per
interface basis using the
trace call command.
The trace can be turned off using the
trace off command.
You don’t actually need to turn on VOIC ELS messages, but they will probably aid
your understanding of the trace output. A sample trace is shown in Figure 65.
2212-yokohama +NETWORK 4
2212-yokohama Voice 0 Console>TRACE CALL
2212-yokohama Voice 0 Console>EXIT
2212-yokohama +EVENT
Event Logging System user console
2212-yokohama ELS>NODISPLAY SUBSYSTEM ALL ALL
Complete
2212-yokohama ELS>DISPLAY SUBSYSTEM VOIC ALL
2212-yokohama ELS>