Specifications

Performance Tuning, and Monitoring 179
The following screens display the status of the frame relay port, DLCI and voice
ports using the
SHOW STATUS command in IBM 9783.
The following screen shows the Data port status such as whether the data port is
in frame relay mode or FRAD mode and whether the Layer3 LMI status is up or
down.
The following screen shows the circuit group statistics such as Circuit group
number, maximum CIR bandwidth, DLCI and SubDLCIs used and the status of
the circuit.
The following screen shows the PVC configuration such as data port used, DLCI
used, port status, and DLCI status:
Local:tokyo> show con cir all
Local:CIRCUIT GROUP CONFIGURATION:>
CIRCUIT CONNECT MAXIMUM TRANS
GROUP# TO NODE CIR/BANDWIDTH RULE INDEX
------------------------------------------------------
1 0.0.0.10 64000 0 0
2 0.0.0.40 64000 0 0
Local:tokyo> show stat data
Local:Data Port Status:>
C D D R D LAYER3
TCSTT LMI
PORT MODE LOOP S D R S R STATUS
--------------------------------------
A1 Ethernet Dis 0 0 1 1 1 Offline
A2 FrameRly Dis 1 1 1 1 1 Up
A3 FrameRly Dis 0 0 0 1 1 Offline
A4 FrameRly Dis 0 0 0 1 1 Offline
Local:tokyo> show st cir all
Local:CIRCUIT GROUP STATUS:>
CIRCUIT MAXIMUM SUB-
GROUP# CIR-B/W CIRCUIT UPA DLCI CHAN STATUS
---------------------------------------------
1 64000 Active
PROCESS A2 16 4
5A2 16 5
6A2 16 6
7A2 16 7
2 64000 Active
PROCESS A2 17 4
5A2 17 5